Video Transcript for Review of Blue Ox SwayPro Weight Distribution Shank 2 Inch Hitch - BLU64ER

Hi everybody. Andy here with etrailer.com. Let's take a real quick look at this Blue Ox SwayPro weight distribution shank for your two inch trailer hitch receiver. Now this shank is going to slide into your two inch hitch receiver and give you the attachment point for your weight distribution systems head assembly. This is designed for use with the Blue Ox SwayPro weight distribution systems, and this does have a weight capacity of 8500 pounds and the maximum tongue weight is 850 pounds. The seven adjustment holes are obviously gonna be where you attach your head assembly.

This is going to let you level your trailer with your tow vehicle. The total height from top to bottom is going to be 11 and a half inches. The total vertical adjustment is eight and three quarters inches, and then our holes are spaced at one and a quarter inches apart on center. So this is also going to give you drop of rise positions that are gonna best fit your particular application. The maximum rise when you have this flipped over is gonna be eight inches and then the maximum drop in this orientation is two inches.

The overall length from end to end is 22 inches long, and then the distance from the center of the adjustment holes to the center of our hitch pin hole is 18 inches. And then, from the center of our hitch pin hole to the front of the weight distribution shank, it's 19 inches. This does feature a powder coat over this steel. It's gonna help resist rust and corrosion. Hitch pin and clip is included with this, but I think that's gonna wrap up our real quick look today.

I do hope that it was helpful for you. Again, my name is Andy. Thank you for joining me.